Avaya P330-ML-ML - Manual (Page 38)

Chapter 2 Avaya P330-ML Layer 2 CLI Commands
24 Avaya P330-ML Reference Guide
Example: (for Unix):
copy stack-config scp
User level: supervisor
Use the copy stack-config scp command to upload the switch-level
parameters from the active bank into a file via SCP.
The syntax for this command is:
copy stack-config scp
P330-N# copy scp startup-config /folder/P330-ML/startup.cfg
149.49.100.41
Username: 330user
Password:
Beginning download operation ...
This operation may take a few minutes...
Please refrain from any other operation during this time.
For more information , use 'show download status' command
********************************************************************
* If you are currently running the P330-ML Device Manager
application,*
* it is recommended to exit from it before performing configuration*
* download operations. *
********************************************************************
filename The file name (full path)
ip The IP address of the SCP server
mod-num The switch number