Avaya P330-ML-ML - Manual (Page 267)

Chapter 3 Avaya P330-ML Layer 3 CLI Commands
Avaya P330-ML Reference Guide 251
show ip access-list-dscp
User level: user, privileged, supervisor
Use the show ip access-list-dscp command to display the DSCP to CoS map
of a policy-list.
The syntax for this command is:
show ip access-list-dscp []
Example:
show ip access-list-summary
User level: user, privileged, supervisor
L This command applies to the P334T-ML only.
Use the show ip access-list-summary command to display a list of all
configured access lists.
The syntax for this command is:
show ip access-list-summary
policy-
list-
number A valid id number for a policy list currently defined for the module
(100 - 149, 0 - default list)
dscp dscp entry (0 - 63)
Router-N> show ip access-list-dscp 101
Trust configuration is trust-cos
DSCP Action Precedence Name
---- -------------------- ---------- ------------
0 fwd0 mandatory DSCP#0
1 fwd0 mandatory DSCP#1
2 fwd0 mandatory DSCP#2
3 fwd0 mandatory DSCP#3
4 fwd0 mandatory DSCP#4
5 fwd0 mandatory DSCP#5
6 fwd0 mandatory DSCP#6
7 fwd0 mandatory DSCP#7
8 fwd1 mandatory DSCP#8
9 fwd1 mandatory DSCP#9
10 fwd1 mandatory DSCP#10
11 fwd1 mandatory DSCP#11