Avaya P330-ML-ML - Manual (Page 89)

Chapter 2 Avaya P330-ML Layer 2 CLI Commands
Avaya P330-ML Reference Guide 75
Example:
set logging file disable
User level: privileged, supervisor.
Use the set logging file disable command to disable logging messages to a
logging file.
The syntax for this command is:
set logging file disable
Example:
set logging file enable
User level: privileged, supervisor.
Use the set logging file enable command to enable logging messages to a
logging file.
The syntax for this command is:
set logging file enable
Example:
set logging server
User level: privileged, supervisor.
Use the set logging server command to define the IP address of a logging
server. You may define up to three logging servers.
set logging server
P330-N# set logging file condition RIP Debugging
Done!
P330-N# set logging file disable
Done!
P330-N# set logging file enable
Done!
ip-address The IP address of the Syslog server.