Avaya P330-ML-ML - Manual (Page 120)

Chapter 2 Avaya P330-ML Layer 2 CLI Commands
106 Avaya P330-ML Reference Guide
set powerinline external power
User level: privileged, supervisor.
L This command applies to P333T-PWR switches only and is used by P330-
ML-ML switches to control P333T-PWR modules in the stack.
Use the set powerinline external power command to set the maximum
power available from the external power supply to power DTEs.
The syntax for this command is:
set powerinline external power
Example:
set ppp authentication incoming
User level: privileged, supervisor.
Use the set ppp authentication command to define the authentication
method used for a PPP server or client session.
The syntax for this command is:
set ppp authentication incoming {pap|chap|none}
Example:
module_number Number of the module for which external power is to be
allocated
power Value of the maximum power allocated to powering DTEs
in Watts.
P330-N# set powerinline external 2 200
external power set to 200Watts
pap PAP authentication method
chap CHAP authentication method
none No authentication
P330-N# set ppp authentication incoming chap
PPP requires CHAP authentication for incoming sessions.