Avaya P330-ML-ML - Manual (Page 265)

Chapter 3 Avaya P330-ML Layer 3 CLI Commands
Avaya P330-ML Reference Guide 249
configuration operation.
The syntax for this command is:
show erase status
show fragment
User level: user, privileged, supervisor
Use the
show fragment command to display information regarding fragmented
IP packets that are destined to the router.
L The router does not perform reassambly of packets in transit.
This command displays the following information:
The syntax for this command is:
show fragment
Example:
Size Maximum number of packets set by the fragment size
command
Chain Maximum number of fragments for a single packet set by the
fragment chain command.
Timeout Maximum number of seconds set by the fragment timeout
command.
Queue Number of packets currently awaiting reassembly.
Assemble Number of packets successfully reassembled
Fail Number of packets which failed to be reassembled
Overflow Number of packets which overflowed the fragment database.
Router-N> show fragment
Max number of concurrently reassembled packets is 100
Max number of fragments per packet is 64
Fragment timeout is 10 sec
Number of packets waiting to be reassembled is 0
Number of successfully reassembled packets is 11954
Number of packets which failed to be reassembled is 0
Number of packets which overflowed the database is 0