Avaya P330-ML-ML - Manual (Page 189)

Chapter 2 Avaya P330-ML Layer 2 CLI Commands
Avaya P330-ML Reference Guide 175
show queuing scheme
User level: user, privileged, supervisor
L This command is available on P330-ML-ML switches only
Use the show queuing scheme command to display the current queuing scheme
settings.
L If this command is to be implemented on a P330-ML-ML switch other than the
stack master, a session should be opened to the relevant switch.
The syntax for this command is:
show queuing scheme
Example:
show radius authentication
User level: user, privileged, supervisor
Use the show radius authentication command to display all RADIUS
authentication configurations.
The syntax for this command is:
show radius authentication
Example:
P330-N>show queuing scheme
Module Queuing Scheme
------ --------------
1 Default
2 Wrr 10:1
P330-N>show radius authentication
RADIUS authentication parameters:
---------------------------------
Mode: Enabled
Primary-server: 192.168.42.252
Secondary-server: 192.168.48.134
Retry-number: 4
Retry-time: 5
UDP-port: 1645
Shared-secret: sodot