GW Instek PSB-2000 Series User Manual - Manual (Page 67)

OPERATION
67
Delay Function
Menu Item: 08 (PSB-L2)
Introduction The delay function is available on the dual channel
model (PSB-2400L2) only. It adds a rise and fall delay
time to the output of channel 2 for a specified amount
of time (in seconds) from a reference point (output of
channel 1). The rise delay time refers to the delay
time for turning the output on. The fall delay time
refers to the delay time for turning the output off.
Fig. Temporal
Concept of
Delay Function
Channel B
Channel A
Positive
(10 seconds Max.)
Negative
(9.99 seconds max.)
Zero
Zero
Negative
(9.99 seconds max.)
Positive
(10 seconds Max.)
Procedure 1. Press the MENU key until menu number ―08‖ is
displayed.
2. Press the ENTER / CHECK key to enter the delay
function settings. Select On or Off with the
encoder wheel. By default the delay setting is
turned off.
Delay OFF Delay ON