GW Instek PSB-2000 Series User Manual - Manual (Page 65)

OPERATION
65
Controlling constant voltage
from the front panel Controlling constant voltage
using external control
Controlling constant current
from the front panel Controlling constant current
using external control
4. Finally, press the ENTER / CHECK key to
validate the settings.
Setting the control mode is now complete.
5. Press the ESC / DISP key to quit the setting
mode and return to normal operation.
External Control Output On/Off
Menu Item: 07(PSB-L, 06(PSB-H)
Introduction The PSB series can use external control to turn the
output on or off by shorting (output on) or
opening certain pins (output off) on the external
control connector.
Use this function to choose whether to use external
control or the OUTPUT key to turn on the output.