GW Instek PSB-2000 Series User Manual - Manual (Page 141)

EXTERNAL CONTROL
141
Responses to Multi-Line Message Commands
Introduction The table below shows the types of multi-line
message commands and the responses to the
commands.
Type Name Description Response
Universal
commands
DCL Clears the GP-IB buffer. O
SPE Establishes the serial polling state. O
SPD Clears serial polling. O
PPU Clears parallel polling. ×
LLO
Brings all devices into the local lockout status
to disable manual operation.
O
Address
commands
UNL Cancels the specified listener status. O
UNT Cancels the specified talker status. O
SDC Clears the GPIB buffer. O
PPC
Enables parallel polling line assignment to the
specified listener in parallel polling.
×
GTL Brings a specified device into the local status. O
GET Triggers a specified device. ×
TCT Transfers the controller. Ч