GW Instek PSB-2000 Series User Manual - Manual (Page 131)

EXTERNAL CONTROL
131
Remote/Local Setting (:REMOTE)
This command sets or inquires about the remote/local status.
Setting :REMOTE
is as shown below:
0: Local status (Normal manual operation)
1: Remote status
2: Local lockout remote status (Cannot return to the local
status through key operation.)
Application
example :REMOTE0
Sets the unit to local status.
Query :REMOTE?
Response
example 1
Indicates that the unit is in the remote status. The query
return value has the same meaning as the setting .
Remark If this query is sent when the unit is in the local status, a
response is made after the unit enters the remote status.
Thus, 1 is returned.