GW Instek PSB-2000 Series User Manual - Manual (Page 101)

EXTERNAL CONTROL
101
Terminator Built-in. May be turned on/off with jumper pin.
Q’ty of ports 2 ports, non-directional
NOTE
The PSB-001 and PSB-002 interface boards have the
same local bus for connecting slave units, which
may be equipped with either type of interface
board.
Connection Methods
Description The following shows an example of connecting
several PSB-2000 series power supply units
through the local bus.
Fig. Local Bus
Connection
PSB 2000 + PSB-001 or PSB-002
System Address: 1(Master unit)
(Shorted CN2 jumper)
GPIB or USB
Local bus
: Modular cables
Windows
personal
computer
PSB 2000 + PSB-001 or PSB-002
System Address: 2(Slave unit)
(Open CN2 jumper)
PSB 2000 + PSB-001 or PSB-002
System Address: 4(Slave unit)
(Shorted CN2 jumper)
PSB 2000 + PSB-001 or PSB-002
System Address: 3(Slave unit)
(Open CN2 jumper)