GW Instek PSB-2000 Series User Manual User Manual

Page 39

OPERATION

Assembling and Connecting the Front Output Terminal
Plugs (PSB-2400H, 2800H)

Procedure

1. Insert the cable (load line) into the plug.

2. Use a 1.5 mm hex key to fasten the 2 screws.

3. Insert the cover into the plug and make sure it

hooks into place (completion image).

4. Turn the power switch off from the unit.

5. Insert the above-mentioned plug into the front

output terminal.

6. When current is drawn from the rear output

terminals, the plug must be removed from the
front output terminal.

wrench

φ4 plug

outside diameter of a cable max. φ4

Completion image

Fig. Assembly diagram of the front output terminal plug

CAUTION

For safety, never output power through both the
front and rear output terminals.