GW Instek PSB-2000 Series User Manual - Manual (Page 125)

EXTERNAL CONTROL
125
Preset Recall (:PRES:CALL)
This command recalls and inquires about preset data.
Setting :PRES:CALL
is as shown below:
0: Cancels preset.
1: Calls PRESET 1 data.
2: Calls PRESET 2 data.
3: Calls PRESET 3 data.
Application
example :PRES:CALL1
Recalls the set values stored in PRESET 1.
Query :PRES:CALL?
Inquires about the setting.
Response
example 1
Indicates that PRESET 1 is selected. The query return
value has the same meaning as the setting .
Remark This command causes an error if the sequence function is
running.
Preset Saving (:PRES:SAVE)
This command saves the current set values (voltage, current and
power) in PRESET memory.
Setting :PRES:SAVE
is as shown below:
1: Saves the current set value in PRESET 1.
2: Saves the current set value in PRESET 2.
3: Saves the current set value in PRESET 3.
Application
example :PRES:SAVE1
Saves the current set values in PRESET 1.
Query None
Remark This command causes an error if the sequence function is
running.