GW Instek PSB-2000 Series User Manual - Manual (Page 155)

APPENDIX
155
Sequence item: Power 410W/820W O
Sequence item: Output OFF O
Sequence item: Time 1sec O
Key lock function OFF ×
One-control operation OFF O
Output status Initialized when power is turned off. ×
Sequence operation status ×(Stop status) ×
Off-timer operation status ×(Non operating status) ×
System Address 1 O
Personal Computer Address 3 O
Parallel/Serial Operation Setting Table
PSB-2400H
Item
Single Parallel
400H 400H x 2
400W 800W
Voltage Setting
SLOW 100mV
FAST 10V
Range 0V to 820V
Min. display digit 100mV
Current Setting
SLOW 10mA 100mA
FAST 1A 1A
Range 0A to 3.07A 0A to 6.1A
Min. display digit 10mA
Power Setting
SLOW 10W 20W
FAST 100W 200W
Range 10W to 410W 20W to 820W
Min. display digit 1W
OVP Setting
SLOW 1V
FAST 100V
Range 10V to 840V
Min. display digit 100mV
SLOW 10mA 20mA
FAST 1A 2A
Range 0.1A to 3.15A 0.2A to 6.3A
Min. display digit 10mA 10mA
For parallel connections, the smallest value that can be displayed (Min. display digit) for
current is 100mA. When some model combinations are used in parallel, the actual current
setting resolution may be different to the display resolution. In this situation the display
may not update with only one click of the encoder.