Various settings, Turning the power on, How to set the voltage – GW Instek PSB-2000 Series User Manual User Manual

Page 42

Text mode
Original mode

PSB-2000 Series User Manual

Various Settings

Turning the Power On

Introduction

First, press the POWER switch to turn on the
power. The power supply unit will show the
startup screen (firmware version and models) for
several seconds and then displays the last-used
settings.

Note

The unit saves the last-used settings automatically
when the power supply source is cut off or the
POWER switch is shut off.

Model PSB-2400L,
version 1.00

The last-used
settings are
displayed

How to Set the Voltage

Procedure

1. Make sure that the V key is lit green. If not,

press the V key to turn it on.

2. Set the voltage level with the encoder wheel.

Note

Check which channel is selected before setting the
voltage on the PSB-2400L2 in order not to change
the set value of the other channel.