GW Instek PSB-2000 Series User Manual - Manual (Page 21)

GETTING STARTED
21
13 Rotary
encoder
Used to select the functions and change the
values.
14 V key (green)
( V )
Used for setting the voltage. Press the key and
rotate the encoder to change the set value. If the A
key is pressed while holding the V key, both LEDs
are lit and the Current LED enters the power
display mode.
15 A key (green)
( A )
Used for setting the current. Press the key and
rotate the encoder to change the set value. If the V
key is pressed while holding the A key, both LEDs
are lit and the Voltage LED enters the power
display mode.
16 PRESET 1
key (green)
(PRESET 1)
Reads out data stored in PRESET 1. Serves as a
start/pause key (
) in the sequence mode.
17 PRESET 2
key (green)
(PRESET 2)
Reads out data stored in PRESET 2. Serves as a
back key ( ) to a skip to previous step number
in the sequence mode.
18 PRESET 3
key (green)
(PRESET 3)
Reads out data stored in PRESET 3. Serves as a
forward key ( ) to skip to the next step number
in the sequence mode.
19 MENU key
(MENU)
Used for setting and selecting various functions.