GW Instek PSB-2000 Series User Manual - Manual (Page 123)

EXTERNAL CONTROL
123
Delay Function ON/OFF (:DELAY:MOD)
This command activates or deactivates the delay function. This
function only applies to the PSB-2400L2.
Setting :DELAY:MOD
is as shown below:
0: Deactivates the delay function. (Normal)
1: Activates the delay function.
Application
example :DELAY:MOD 1
Activates the delay function.
Query :DELAY:MOD?
Inquires about the setting.
Response
example 1
Indicates that the delay function is working. The query
return value has the same meaning as the setting .
Remark This command causes an error if the sequence function is
running.
Delay Rise Time Setting (:DELAY:RISE)
This command sets or inquires about the delay time for turning on
the output. This function only applies to the PSB-2400L2.
Setting :DELAY:RISE
The range is from -9.99 to +10.00 seconds.
Application
example :DELAY:RISE 0.3
Sets the delay time for turning on the output to 0.3
seconds.
Query :DELAY:RISE?
Inquires about the setting.
Response
example 0.3
Indicates that the delay time for turning on the output is
set to 0.3 seconds.
Remark This command causes an error if the sequence function is
running.