GW Instek PSB-2000 Series User Manual - Manual (Page 129)

EXTERNAL CONTROL
129
Standard Event Status Register Inquiry (*ESR?)
The function of this command is described in the ―Standard Event
Status Register‖ in the following section.
Standard Event Status Enable Register Setting (*ESE)
The function of this command is described in ―Standard Event
Status Enable register‖ in the following section.
Status Byte Inquiry (*STB?)
The function of this command is described in ―Status Byte Register‖
in the following section.
SRQ (Service Request)Register Setting (*SRE)
The function of this command is described in ―Service Request
Register‖ in the following section.
Buffer Clear (*CLS)
This command clears the buffers.
Setting *CLS
Clears the send buffer, receive buffer, local bus buffer,
command execution buffer, status byte and event register.
Query None
Communication Reset (*RST)
This command clears the communication status.
Setting *RST
Clears the send buffer, receive buffer, local bus buffer,
command execution buffer, status byte and event register.
Clears the ESE register and SRE register and also clears
the talker and listener settings.
Query None