The catc bit tracer view - pci express (pcie) only, Serial data debug solutions 30 – Teledyne LeCroy Serial Data Debug Solutions User Manual
Page 30
Serial Data Debug Solutions
30
919586 RevA
Please refer to LeCroy Protocol Analyzer Software user manu
for information
regarding more specific usage for other Storage, Peripherals, and Interconnect Protocols. See Storage,
Peripherals, and Interconnect Protocols Overview (on page 154) for more information.
The CATC Bit Tracer View - PCI Express (PCIe) Only
Based on selections made on ProtoSync Right-Hand Dialogs (located on protocol decode dialogs), ProtoSync PE-
B may also be used to display a CATC Bit Tracer view. This view is ideally correlated with the LeCroy 8b/10b
Decode. See 8b/10b Decode Setup Detail (on page 45) for detailed steps to send 8b/10b Decode data to
ProtoSync.
The CATC Bit Tracer view shows the Hexadecimal form of each data bit of your transferred data. Oscilloscope
Decode and ProtoSync results look like the following:
Note: Please refer to LeCroy Protocol Analyzer Software user manuals at
for information
regarding more specific usage.
Oscilloscope and Protocol Analyzer - A Concurrent Analysis Example
This topic demonstrates the concurrent use of the Oscilloscope and Protocol Analyzer programs using PCIEbus
signals.
Note: Please refer to LeCroy Protocol Analyzer Software user manuals a
for information
regarding more specific usage when using other supported protocols, see Storage, Peripherals, and
Interconnect Protocols Overview (on page 154).