Teledyne LeCroy Serial Data Debug Solutions - Manual (Page 199)

Operator's Manual
919586 RevA 199
Slider Bar
Some models provide what is known as a Slider Bar along the bottom of the screen when a keyboard is
attached to the instrument. The Slider Bar allows you to select your entered value by moving a horizontal slider
(left to right provides low to high amounts).
The Slider Bar
Pop-Up Keypad
Some models provide a pop-up Keypad when you touch twice in the same control. A keypad button is also
provided on the slider bar (on models that have the slider bar) which shows the pop-up keypad when touched.
For many controls, once the Pop-Up Keypad is shown the Front Panel Controls can be used to adjust the value in
the pop-up. The Pop-Up contains Up and Down arrow buttons, Set to Max, Default, and Min buttons, and the
Keypad itself for providing your value.
The slider bar also has a handy default value button for quickly entering the default for the control.
Default and Keypad Buttons on the Slider Bar are only shown on 7, 8, and 9 Zi models (with a keyboard
attached).
UNIQUE WaveRunner 6 Zi and 12-Bit HRO and 12-Bit HRO FEATURE: The 6 Zi and 12-Bit HRO provides touch-
screen interface controls in a different manner. See The WavePilot Control Area and The SuperKnob
Overview in the online help.
Specifications
Note: Specifications are subject to change without notice.
Please refer to the LeCroy website at www.lecroy.com for the most current specification information regarding
your product.
Contact LeCroy for Support
Use the following regional contacts to find the appropriate support location nearest you.
Whether you're looking for sales or technical support, our staff can provide assistance with installation,
calibration, and product knowledge regarding a full-range of our software applications and accessories.