Teledyne LeCroy Serial Data Debug Solutions - Manual (Page 111)

Operator's Manual
919586 RevA 111

TxCmd1 Right-Hand Dialog - Provide values for the RT and Sub Address fields complete with Condition,
Value, To (for range conditions), and T/R controls. Word Count/Mode Code fields include Condition and
Mode Code controls. Select from 32 possible Mode Code values:
Mode Code Field Values
Dynamic Bus
Control Synchronize Transmit Status
Word Initiate Self Test Transmitter
Shutdown
Override
Transmitter
Shutdown
Inhibit Terminal
Flag Override Inhibit
Terminal Flag Reset Remote
Terminal Reserved Reserved Reserved
Reserved Reserved Reserved Reserved
Transmit Vector
Word Synchronize
Transmit Last
Command Transmit BIT
Word Selected
Transmitter
Shutdown Override Selected
Transmitter
Shutdown Reserved Reserved
Reserved Reserved Reserved Reserved Reserved Reserved
Reserved Reserved

TxStat1 Right-Hand Dialog - Provide RT Address field values for Condition, Value and To (for range
conditions). Select Status Word Setup values (0, 1, or X) for Error, Instr, SRQ, Bcast Rcvd, Busy, Sub Syst,
Dyn Bus, and Term Flg.
Mode command & Data (Xmit) Sub-Type and Right-Hand Dialogs
When the Mode command & Data (Xmit) sub-type is selected, the TxCmd1, DW, and TxStat1 right-hand dialogs
are made available.
Note: Different combinations of similar right-hand dialogs are made available for the various Sub-Types. See
BC-RT (Rcv) Sub-Type Right-Hand Dialogs for screen-shots. Otherwise, provide field information as directed
verbally.