Teledyne LeCroy Serial Data Debug Solutions - Manual (Page 124)

Serial Data Debug Solutions
124 919586 RevA
You can touch buttons on the View I & Q Wizard pop-up to View Constellation (XY) or View Parameters.

View Constellation creates a Constellation Diagram using the converted I an Q waveforms from your
signal.

View Parameters show DigRF v4-specific measurement parameters in tabular form beneath the signal
display grid.
For general information about using controls shown on the main Serial Decode dialog, refer to Accessing The D
and TD Supported Protocol Toolsets (on page 13).
MIPI DigRF v4 Right-Hand Dialog
The MIPI DigRF v4 dialog is located on the lower-right part of the screen.
DigRF v4 uses color-coded overlays or annotations on various sections of the protocol decode for an easy-to-
understand visual display.