Teledyne LeCroy Serial Data Debug Solutions - Manual (Page 173)

Operator's Manual
919586 RevA 173
The following figure shows row Idx 34 selected and Z1 resized accordingly. The zoom position is adjusted
corresponding to a TS1 sequence. An 8b/10b decode is clear on one of the TS1 sequences.
Zoomed in on Z1, showing the 8b/10b decode of a TS1 sequence.
The following figure shows partial annotation rectangles on the left and right sides showing name and repetition
count values (because the annotations are large enough). However, they do not contain Details. Notice how the
middle annotation rectangle contains Name, repetition count, and Details (because the annotation wide enough
for all this information).
On the top trace, only the Electrical Idle is annotated with its short form Name, EI; all the other rectangles are
too narrow to hold any annotation. Even so, we can see the repetitive dim vertical stripes, which are SKIP
ordered sets; and the bright blue vertical stripes are DLLPs. Dull blue (on the left) is TS1; Grey (between SKIPs
starting about 1/3 of the way from the left) is Logical Idle.