Serial data debug solutions 112 – Teledyne LeCroy Serial Data Debug Solutions User Manual

Page 112

Serial Data Debug Solutions

112

919586 RevA



TxCmd1 Right-Hand Dialog - Provide values for the RT and Sub Address fields complete with Condition,
Value, To (for range conditions), and T/R controls. Word Count/Mode Code fields include Condition and
Mode Code controls. Select from 32 possible Mode Code values:

Mode Code Field Values

Dynamic Bus
Control

Synchronize

Transmit Status
Word

Initiate Self Test

Transmitter
Shutdown

Override
Transmitter
Shutdown

Inhibit
Terminal Flag

Override Inhibit
Terminal Flag

Reset Remote
Terminal

Reserved

Transmit
Vector Word

Synchronize

Transmit Last
Command

Transmit BIT
Word

Selected
Transmitter
Shutdown

Override Selected
Transmitter
Shutdown

Reserved



DW Right-Hand Dialog - Provide Data Pattern Setup field values for Data Condition,Start Bit and # Data
Bits, Data Value and Data Value To (for range conditions).



TxStat1 Right-Hand Dialog - Provide RT Address field values for Condition, Value and To (for range
conditions). Select Status Word Setup values (0, 1, or X) for Error, Instr, SRQ, Bcast Rcvd, Busy, Sub Syst,
Dyn Bus, and Term Flg.

Mode command & Data (Rcv) Sub-Type and Right-Hand Dialogs

When the Mode command & Data (Rcv) sub-type is selected, the RxCmd2, DW, and RxStat2 right-hand dialogs
are made available.

Note: Different combinations of similar right-hand dialogs are made available for the various Sub-Types. See

BC-RT (Rcv) Sub-Type Right-Hand Dialogs

for screen-shots. Otherwise, provide field information as directed

verbally.