Burkert Type 8717 - Manual (Page 72)

72
Starting up the Modbus
register
address in
mfc number of
registers Designation / Description r/w format
0011 1 Baudrate
defines the baud rate of the Modbus communication
Value Baud rate
0
300
1 600
2 1200
3 2400
4 4800
5 9600
6 19200
7 38400
8 57600
9 115200
Attention please:
• A changed value will be active after a device reset.
• This register is available from firmware version
A.00.96.
R/W UINT8
0012 1 Parity
defines the parity bit of the Modbus communication
Value Parity
0
nOne
1 Odd
2 EVEN
Attention please:
• A changed value will be active after a device reset.
• This register is available from firmware version
A.00.96.
R/W UINT8
0013 1 Stopbit
defines the number of stop bits of the Modbus
communication.
Value Number of Stop bit
1
1 Stop bit
2 2 Stop bits
Attention please:
• A changed value will be active after a device reset.
• This value will be stored non volatile from firmware
version A.01.00.
R/W UINT8
english
MFC Family