Burkert Type 8717 - Manual (Page 22)

22
Serial Communication Serial Communication
command number
command name 0x95
SetBusaddress
request
Command
0x95
Byte count 2
data 2 bytes
0 – 1
Bus address (unsigned int) 1)
response
Command
0x95
Byte count 4
Status 2 bytes, device status
data 2 bytes
0 – 1
Bus address (unsigned int) 1)
Description
Available as of firmware version A.00.28.09.
Command for setting the bus address (PROFIBUS, deviceNet, etc.). If the connected device is not a bus
device, the error "Access denied" is returned in the response.
1) First byte transferred: LSB
english
MFC Family