Burkert Type 8717 - Manual (Page 53)

53
Acyclic Data Transfer with
PROFIBUS, DeviceNet and CANopen
7.4. S-analog Sensor Object
S-analog Sensor Object
name Description of the input data
attributes attribute address
(class, instanceat-
tribute; data type) Slot, index index, Subindex
Dvn Dpv1 canopen
data Type Read Write
describes the data format of the
actual value and the "Flow Full
Scale" (nominal flow)
Hex
0xC3 INT
0xCA REAL
dec: 49, 1, 3
Hex: 31, 1, 3
USINT
dec: 1, 3
Hex: 1, 3 dec: 8448, 1
Hex: 2100, 1
UNSIGNEd8
data Units Read Write
min. value 2048,
max. value 4103
list of units see
“9.2. Table of units”
"% "
"Units per thousand"
and the calibrated device unit
dec: 49, 1, 4
Hex: 31, 1, 4
UINT
dec: 1, 4
Hex: 1, 4 dec: 8448, 2
Hex: 2100, 2
UNSIGNEd16
Reading Valid Read only
Min. value 0, max. value 1
dec: 49, 1, 5
Hex: 31, 1, 5
BOOL
dec: 1, 5
Hex: 1, 5 dec: 8448, 3
Hex: 2100, 3
UNSIGNEd8
Actual value Read only
depends on the settings under
data type and data units.
dec: 49, 1, 6
Hex: 31, 1, 6
INT
Or
REAL
dec: 1, 6
Hex: 1, 6 dec: 8448, 4
Hex: 2100, 4
INTEGER16
Or
dec: 8448, 5
Hex: 2100, 5
REAL32
Status Read only
This is not supported yet.
The return value is always 0.
dec: 49, 1, 7
Hex: 31, 1, 7
BYTE
dec: 1, 7
Hex: 1, 7 dec: 8448, 6
Hex: 2100, 6
UNSIGNEd8
english
MFC Family