Burkert Type 8717 - Manual (Page 7)

7
Serial Communication
3. Serial COMMuniCaTiOn
3.1. general information
3.1.1. rS232 - Driver included in the device
(e.g. for types 8626/8006, 8716/8706, 8712/8702)
mfc / mfm pc (SuB-D 9-pin plug)
RS232 Txd (pin 6 SUB-Hd socket) Pin 2
RS232 Rxd (pin 14 SUB-Hd socket) Pin 3
RS232 GNd (pin 15 SUB-Hd socket) Pin 5
3.1.2. rS232 - Driver not included in the device
(e.g. for type 8711/8701)
mfc / mfm
Txd
From device (pin 15 SUB-d plug)
Rxd From device (pin 14 SUB-d plug)
GNd From device (pin 11 SUB-d plug)
3.1.3. Transfer protocol
transfer channels
The following lines are used for the serial interface:
Wire-conducted communication
GNd
Ground
Rxd Reception line (as seen by MFC)
Txd Transmission line (as seen by MFC)
Data format
The layout of the serial interface protocol is as follows:
Transfer rate Standard 9600 Bd (differs from HART)
data bits 8
Parity None (differs from HART)
Stop bits 1
Hardware handshake No
english
MFC Family