Burkert Type 8693 - Manual (Page 94)

94
Start-up and operation of the
position controller Type 8692
22.2.3. removing auxiliary functions from the main menu
If a function is removed from the main menu, the settings implemented previously under this function become
invalid again.
→
Press the arrow keys to select the ADD.FUNCTION menu option in the main menu.
→
Enter the submenu by pressing the selection key on the right (ENTER).
→
Using the arrow keys, select an auxiliary function indicated with a cross (x).
→
Press the selection key on the right (ENTER) to remove the cross (x).
→
After pressing the selection key on the left (EXIT), the auxiliary function is deactivated and removed from the
main menu.
22.2.4. setting numerical values
You set numerical values in the designated menu options by pressing once or several times the
• up arrow key (increase numerical value) or
• down arrow key (reduce numerical value).
In the case of four-digit numbers only the saved digit can be set with the up arrow key. Press the down arrow key
to switch to the next digit (see “Figure 43”).
Accept the set value
Return without change
Previously set value
ESC OK + <-
SET VALUE
Access Code: 1
000
0
ESC OK + -
SET VALUE
y 0 -> : 0.0
%
0.0
Changeable value
Change to next number
Increase number
Increase value
Reduce value
Changeable number
Accept the set value
Return without change
Figure 43: Setting numerical values
english
Type 8692, 8693