Security code protection for the settings – Burkert Type 8693 User Manual
Page 110

110
Start-up and operation of the
position controller Type 8692
22.3.10. SECURITY
code protection for the settings
Use the
SECURITY function to prevent the positioner or individual functions from being accessed unintentionally.
Factory setting:
Access Code:
0000
If the code protection is activated, the code (set access code or master code) must be input whenever operator
action is disabled.
All operator actions can be implemented with the non-changeable master code. This 4-digit master code
can be found in the appendix of these operating instructions in the chapter entitled "Master code".
SECURITY
CODE
EXIT
ENTER
OK
SELEC
INPUT
ESC
OK
+
<-
MAIN
MANU/AUTO
ADDFUNCT
X.TUNE
SET VALUE
Access Code: 1
000
0
Figure 64:
Operating structure SECURITY
Input screen for inputting or changing the
access code (for description of input see below)
Blocking access to the configuration level
Blocking switchover between the MANUAL / AUTOMATIC (MANU/AUTO) operating states
Blocking the input of auxiliary functions
Blocking the activation of self-parameterisation (Autotune)
english
Type 8692, 8693