Burkert Type 8693 - Manual (Page 41)

41
Control and display elements,
operating modes
MENU SP CMD MANU
POS
%
XXX
Display of actual position of the valve actuator
(0 - 100%)
MENU POS TEMP MANU
CMD
%
XXX
• Display of nominal position of the valve actuator or
• Display of nominal position of the valve actuator after
rescaling by possibly activated split range function or
correction characteristic
(0 - 100%)
MENU CMD PV
TEMP
*C
XXX
Internal temperature in the body of the positioner
( °C)
MENU TEMP SP MANU
PV
l/s
XXX
Process actual value
MENU PV POS INPUT 4)
SP
l/s
XXX
Process set-point value
MENU HOLD 5) SP / PV ( t )
Representation of process actual value and set-point value
Table 12: AUTOMATIC operating state for Type 8693
If the P.CONTROL additional function is not active, the displays are represented as under Type 8692.
4)
INPUT is indicated here if the internal set-point value default has been selected (P.CONTROL - SP-INPUT -
internal).
MANU is indicated here if the external set-point value default has been selected (P.CONTROL - SP-INPUT
- external).
5)
HOLD: hold the display - CONT: continue the display
english
Type 8692, 8693