Burkert Type 8693 - Manual (Page 9)

9
General Information
Safety Instructions
2. auThOrized use
Incorrect.use.of.the.positioner.Type.8692.and.Type.8693.may.be.a.hazard.to.people,.nearby.equipment.
and.the.environment..
The device is designed to be mounted on pneumatic actuators of process valves for the control of media.
• Do not expose the device to direct sunlight.
• Use according to the permitted data, operating conditions and conditions of use specified in the contract
documents and operating instructions, as described in chapter “Description of system” - “11. Technical
data“ in this manual and in the valve manual for the respective pneumatically actuated valve.
• The device may be used only in conjunction with third-party devices and components recommended and
authorised by Bürkert.
• In view of the large number of options for use, it is essential prior to installation to study and, if necessary, to
test whether the positioner is suitable for the specific application case.
• Correct transportation, correct storage and installation and careful use and maintenance are essential for
reliable and problem-free operation.
• Use the positioner Type 8692 and Type 8693 only as intended.
2.1. restrictions
If exporting the system/device, observe any existing restrictions.
english
Type 8692, 8693