Burkert Type 8693 - Manual (Page 92)

92
Start-up and operation of the
position controller Type 8692
22. cOnfiguring The auxiliary funcTiOns
The operating concept for the positioner is based on a strict division between basic and auxiliary functions.
When the device is delivered, only the basic functions are activated. They are used during the initial start-
up to implement basic settings specific to the device. They are adequate for normal operation. For more
demanding control tasks select and specifiy auxiliary functions at the configuration level.
22.1. Keys at the configuration level
Press.the.key in.the.menu in.a.selected.and.confirmed.menu.option
Scroll up (select) Increment (increase) numerical values
Scroll down (select) Decrement (reduce) numerical values
Press.the.key in.the.menu in.the ADD.FUNCTION
Selection keyon
right
ENTER
Retrieve the selected menu option to
input parameters
or start the X.TUNE
Select a menu option in the auxiliary menu for
inclusion in or removal from the main menu.
The menu option is indicated in the auxiliary
menu by a
cross (x) in the box
Press.the.key in.the.menu in.a.selected.and.confirmed.menu.option
Selection keyon
right
ENTER
SELEC
Retrieve the selected menu option to
input parameters
or start the X.TUNE
Confirm the parameter selection marked with
arrow keys.
Press.the.key in.the.menu in.a.selected.and.confirmed.menu.option
Selection keyon
left
EXIT
The configuration level is left and the
data is saved in the memory (EEPROM). Leave a sub-menu option.
Table 29: Keys at the configuration level
english
Type 8692, 8693