Burkert Type 8693 - Manual (Page 36)

36
Control and display elements,
operating modes
12. cOnTrOl and display elemenTs
The following chapter describes the control and display elements of the positioner.
Further information on the control of the positioner can be found in the chapters entitled “Installation”, “Start-up
and operation of the position controller Type 8692” and “Start-up and operation of the process controller Type
8693”.
12.1. control and display elements of the positioner
MENU INPUT CMD MANU
POS
% XXX
Up arrow key
Description of
configuration of
the keys
Left selection key Right selection key
Display
Down arrow key
Figure 11: Description of the control module
The positioner features a 4-key control panel and a 128x64 dot matrix graphics display as a display element.
12.2. configuration of the keys
The assignment of the 4 keys on the control panel differs depending on the operating status (AUTOMATIC /
MANUAL) or operating level (Operate process / Parameterization and Configuration) of the positioner.
The configuration of the keys is represented in the lower grey bar on the display panel.
The description of the operating statuses (AUTOMATIC / MANUAL) and the operating levels (Operate
process / Parameterization and Configuration) can be found in the chapters entitled “13. Operating
modes” and “14. Operating levels”.
english
Type 8692, 8693