Including auxiliary functions in the main menu, Removing auxiliary functions from the main menu – Burkert Type 8693 User Manual
Page 155

155
Start-up and operation of the
position controller Type 8693
If the
P.CONTROL auxiliary function is active for the process controller Type 8693, the following auxiliary func-
tions differ from those described for the position controller Type 8692 (highlighted in “Figure: 94”):
•
CUTOFF
•
SECURITY
•
SIG.ERROR
•
OUTPUT
•
CAL. USER
25.1.1. including auxiliary functions in the main menu
→
Press the arrow keys to select the
ADD.FUNCTION menu option in the main menu and press the right
selection key
(ENTER) to enter the submenu.
→
Press the arrow keys to select the required auxiliary function.
→
Press the selection key on the right (ENTER) to mark the auxiliary function with a cross (x).
→
All marked functions are transferred to the main menu when the selection key on the left (EXIT) is pressed.
→
In the main menu input the parameters of the auxiliary functions.
25.1.2. removing auxiliary functions from the main menu
If a function is removed from the main menu, the settings implemented previously under this function become
invalid again.
→
Press the arrow keys to select the
ADD.FUNCTION menu option in the main menu.
→
Enter the submenu by pressing the selection key on the right (ENTER).
→
Press the arrow keys to select an auxiliary function indicated with a cross (x).
→
Press the selection key on the right (ENTER) to remove the cross (x).
→
After pressing the selection key on the left (EXIT), the auxiliary function is deactivated and removed from the
main menu.
A precise description on the operation of the auxiliary functions can be found in the chapters entitled
"21.4. Specifying the basic settings" and in "22. Configuring the auxiliary functions".
english
Type 8692, 8693