Burkert Type 8693 - Manual (Page 102)

102
Start-up and operation of the
position controller Type 8692
22.3.4. DIR.CMD
effective sense of direction of the position controller set-
point value
Use this auxiliary function to set the effective sense of direction between the input signal ( INPUT) and the nominal
position ( CMD) of the actuator.
Factory setting: Rise
DIR.CMD
ENTER
SELEC Rise
EXIT
Fall
Direct effective direction
(e.g. 4 mA or 0 V →→0 %,
20 mA or 5/10 V →→100%)
Inverse effective direction
(e.g. 4 mA or 0 V → 100%,
20 mA or 5/10 V → 0%)
Figure 52: Operating structure DIR.CMD
Changed values are not transferred into the memory (EEPROM) until the main menu (MAIN) is left.
Nominal position
(
CMD)
Input signal
(
INPUT)
Figure 53: Graph DIR.CMD
english
Type 8692, 8693