Burkert Type 8693 - Manual (Page 151)

151
Start-up and operation of the
position controller Type 8693
24.3.2. information on the display
The following variables are indicated on the display for the process controller and it is possible to switch between
them with the arrow keys:
representation
of value
47)
value range / unit description
POS XXX 0...100 % Display of actual position of the valve actuator
CMD XXX 0...100 % Display of nominal position of the valve actuator
TEMP XXX -100 – 150 °C Internal temperature in the housing of the positioner
PV XXX Depending on the signal type Process actual value
SP XXX Depending on the signal type Process set-point value
Table 38: Information on the display
24.3.3. Operating structure
Configuration
Menu option
EXIT
Display
(no operator action)
Switch between the
displays
48)
POS PV
CMD SP
TEMP
EXIT
MENU
AUTOMATIC operating state
MANUAL operating state
MANU AUTO
active 48)
SP
Set process set-
point value
INPUT
OK
Figure 93: AUTOMATIC operating structure - 8693
47)
Displayed only when P.CONTROL auxiliary function activated.
48)
only active if the internal set-point value default (P.CONTROL / SETUP / SP INPUT / internal) has been
selected.
english
Type 8692, 8693