Operating.levels, . switching.between.the.operating.levels, Operating levels – Burkert Type 8693 User Manual
Page 43: Switching between the operating levels

43
Control and display elements,
operating modes
14.
OperaTing levels
The menu structure in the control module of the positioner contains 2 operating levels:
• level 1:
operate process
Operating mode
AUTOMATIC
→
Process / input data displayed
MANUAL
→
Actuator opened and closed manually
• level 2:
parameterization and configuration
Input operating parameters
Supplement the menu with optional menu options
14.1. switching between the operating levels
If AUTOMATIC operating mode has been set when switching from level 1 (Operate process) to level 2
(Parameterization and Configuration), the process continues running while positioner settings are imple-
mented on level 2.
→
To switch from level 1 (Operate process) to level 2 (Parameterization), press the selection key on the left
(MENU) for approx. 3 seconds. During these 3 seconds (Countdown) 2 bars converge (see “Figure 13”).
→
To switch back from level 2 (Parameterization and Configuration) to level 1 (Operate process), press the
selection key on the left (EXIT).
MENU
MANU
Press selection key
on left for approx. 3
seconds
2 bars which converge
Countdown
EXIT
ENTER
1
M A I N
ACTUATOR
INPUT
X. TUNE
ADD. FUNCTION
Switch to level 2: Parameterization
Switch back to level 1: Operate process
Press selection key
on left
Figure 13:
Switch operating level
english
Type 8692, 8693