Error.messages.and.malfunctions.type.8692, . error.messages.on.the.display, General error messages – Burkert Type 8693 User Manual
Page 216: Error messages and malfunctions type 8692, Error messages on the display

216
Maintenance and troubleshooting
49.
errOr messages and malfuncTiOns
Type 8692
49.1. error messages on the display
49.1.1. general error messages
Display
Causes.of.error
remedial.action
min
Minimum input value has been reached Do not reduce value further
max
Maximum input value has been reached Do not increase value further
CMD error
Signal error
Set-point value position controller
Check signal
EEPROM fault
EEPROM defective
not possible, device defective
MFI fault
80)
Field bus board defective
invalid code
Incorrect access code
Input correct access code
Table 58:
General error messages, Type 8692
80)
only field bus
english
Type 8692, 8693
This manual is related to the following products: