Burkert Type 8693 - Manual (Page 127)

127
Start-up and operation of the
position controller Type 8693
23. sTarTing up and seTTing up The
prOcess cOnTrOller Type 8693
To set up the positioner as a process controller, it is first necessary to specify the basic functions of the
position controller and then supplement the auxiliary functions for the process control.
23.1. safety instructions
danGer!
Danger.–.high.pressure.in.the.equipment!
There is a serious risk of injury when reaching into the equipment.
• Before loosening the lines and valves, turn off the pressure and vent the lines.
WarninG!
Danger.-.improper.installation!
Improper installation may result in injuries as well as damage to the device and the area around it.
• Fluid and electrical installations may be carried out by authorised technicians only and with the appropriate
tools!
Danger.due.to.unintentional.activation.of.the.equipment!
Unintentional activation of the equipment during installation may result in injuries and damage.
• Take appropriate measures to prevent the equipment from being unintentionally activated.
english
Type 8692, 8693