Burkert Type 8693 - Manual (Page 87)

87
Start-up and operation of the
position controller Type 8692
21. OperaTiOn Of The pOsiTiOn
cOnTrOller
A precise description of the control and display elements, as well as the configuration of the keys can be
found in the chapter entitled "13. Control and display elements".
When the operating voltage has been switched on, the positioner is at the process operating level in the AUTO-
MATIC operating state.
At the process operating level the normal control mode is implemented and monitored (AUTOMATIC) and the valve
is manually opened or closed (MANUAL).
MENU INPUT CMD MANU
POS
% XXX
Up arrow key
Configuration of
the keys
left selection key right selection key
Display
Down arrow key
Figure 39: Description of the control module
21.1. switching between the operating states
The right Selection key can be used to switch between the two operating states AUTOMATIC (AUTO) and MANUAL
(MANU).
In the AUTOMATIC operating state a bar runs along the upper edge of the display from left to right.
english
Type 8692, 8693