Burkert Type 8693 - Manual (Page 57)

57
Installation
16. fluid cOnnecTiOn
The dimensions of the positioner and the different complete device models, consisting of positioner, actuator and
valve, can be found in the relevant data sheets.
16.1. safety instructions
danGer!
Danger.–.high.pressure.in.the.equipment!
There is a serious risk of injury when reaching into the equipment.
• Before loosening the lines and valves, turn off the pressure and vent the lines.
WarninG!
Danger.-.improper.installation!
Improper installation may result in injuries as well as damage to the device and the area around it.
• Fluid and electrical installations may be carried out by authorized technicians only and with the appropriate
tools!
Danger.due.to.unintentional.activation.of.the.equipment!
Unintentional activation of the equipment during installation may result in injuries and damage.
• Take appropriate measures to prevent the equipment from being unintentionally activated.
16.2. installation of the process valve
Thread type and dimensions can be found in the corresponding data sheet.
→
Connect the valve according to the operating instructions for the valve.
english
Type 8692, 8693