ZyXEL Communications 200 Series - Manual (Page 812)

Appendix A Log Descriptions
ZyWALL USG 100/200 Series User’s Guide
812
Table 306 File Manager Logs
LOG MESSAGE DESCRIPTION
ERROR:#%s, %s Apply configuration failed, this log will be what CLI command is and
what error message is.
1st %s is CLI command.
2nd %s is error message when apply CLI command.
WARNING:#%s, %s Apply configuration failed, this log will be what CLI command is and
what warning message is.
1st %s is CLI command.
2nd %s is warning message when apply CLI command.
ERROR:#%s, %s Run script failed, this log will be what wrong CLI command is and what
error message is.
1st %s is CLI command.
2nd %s is error message when apply CLI command.
WARNING:#%s, %s Run script failed, this log will be what wrong CLI command is and what
warning message is.
1st %s is CLI command.
2nd %s is warning message when apply CLI command.
Resetting system... Before apply configuration file.
System resetted. Now
apply %s..
After the system reset, it started to apply the configuration file.
%s is configuration file name.
Running %s... An administrator ran the listed shell script.
%s is script file name.
Table 307 E-mail Daily Report Logs
LOG MESSAGE DESCRIPTION
Email Daily Report has
been activated.
The daily e-mail report function has been turned on. The ZyWALL will
e-mail a daily report about the selected items at the scheduled time if
the required settings are configured correctly.
Email Daily Report has
been deactivated.
The daily e-mail report function has been turned off. The ZyWALL will
not e-mail daily reports.
Email daily report has
been sent
successfully.
The ZyWALL sent a daily e-mail report mail successfully.
Cannot resolve mail
server address %s.
The (listed) SMTP address configured for the daily e-mail report
function is incorrect.
Mail server
authentication failed.
The user name or password configured for authenticating with the e-
mail server is incorrect.
Failed to send report.
Mail From address %s1
is inconsistent with
SMTP account %s2.
The user name and password configured for authenticating with the e-
mail server are correct, but the (listed) sender e-mail address does not
match the (listed) SMTP e-mail account.
Failed to connect to
mail server %s.
The ZyWALL could not connect to the SMTP e-mail server (%s). The
address configured for the server may be incorrect or there may be a
problem with the ZyWALL’s or the server’s network connection.