ZyXEL Communications 200 Series - Manual (Page 222)

Chapter 10 Interface
ZyWALL USG 100/200 Series User’s Guide
222
10.6.1 PPP Interface Edit Screen
This screen lets you configure new or existing PPPoE/PPTP interfaces. To access this screen,
click the Edit icon in the PPP Interface screen. The PPP interface Edit > Configuration
screen is shown here as an example. You can click the Wizard tab instead to configure just the
key settings. See
Section 10.5 on page 214 for details.
Add icon This column lets you create, edit, remove, activate, deactivate, connect and
disconnect interfaces.
To edit an interface, click the Edit icon next to it. The PPPoE/PPTP Interface
Add/Edit screen appears.
To activate or deactivate an interface, click the Active icon next to it. Make sure
you click Apply to save and apply the change.
To connect or disconnect an interface, click the Connect icon next to it. You
might use this icon to test the interface or to manually establish the connection
for a Dial-on-Demand PPPoE/PPTP interface.
Apply Click Apply to save your changes back to the ZyWALL.
Reset Click Reset to begin configuring this screen afresh.
Table 59 Network > Interface > PPP (continued)
LABEL DESCRIPTION