ZyXEL Communications 200 Series - Manual (Page 599)

Chapter 35 User/Group
ZyWALL USG 100/200 Series User’s Guide
599
Figure 444 User/Group > Group > Add
The following table describes the labels in this screen.
35.4 Setting Screen
The Setting screen controls default settings, login settings, lockout settings, and other user
settings for the ZyWALL. You can also use this screen to specify when users must log in to
the ZyWALL before it routes traffic for them.
To access this screen, login to the web configurator, and click Object > User/Group >
Setting.
Table 195 User/Group > Group > Add
LABEL DESCRIPTION
Name Type the name for this user group. You may use 1-31 alphanumeric characters,
underscores(
_ ), or dashes (-), but the first character cannot be a number. This
value is case-sensitive. User group names have to be different than user names.
Description Enter the description of the user group, if any. You can use up to 60 characters,
punctuation marks, and spaces.
Available This field displays the names of the users and user groups that can be added to the
user group.
Select users and groups that you want to be members of this group and click the
right arrow to add them to the member list.
Member This field displays the names of the users and user groups that have been added to
the user group. The order of members is not important. To remove members, select
them and click the left arrow.
OK Click OK to save your changes back to the ZyWALL.
Cancel Click Cancel to exit this screen without saving your changes.