ZyXEL Communications 200 Series - Manual (Page 126)

Chapter 6 Tutorials
ZyWALL USG 100/200 Series User’s Guide
126
Click Network > Interface > Ethernet and the wan1 interface’s Edit icon. Configure the IP
address, subnet mask, and default gateway settings as follows and click OK.
Figure 47 Network > Interface > Ethernet > Edit wan1
6.1.2 How to Configure the OPT Interface for a Local Network
Here is how to set the opt interface for a separate local network. It uses 192.168.4.1 as its IP
address and has a DHCP server to distribute IP addresses to connected DHCP clients.
1 Click Network > Interface > Ethernet and the opt interface’s Edit icon. Set the IP
Address to 192.168.4.1 and the Subnet Mask to 255.255.255.0. Zone to WAN and
select Get Automatically as shown next. Then click More Settings.