ZyXEL Communications 200 Series - Manual (Page 646)

Chapter 41 Certificates
ZyWALL USG 100/200 Series User’s Guide
646
If you configured the My Certificate Create screen to have the ZyWALL enroll a certificate
and the certificate enrollment is not successful, you see a screen with a Return button that
takes you back to the My Certificate Create screen. Click Return and check your
information in the My Certificate Create screen. Make sure that the certification authority
information is correct and that your Internet connection is working properly if you want the
ZyWALL to enroll a certificate online.
41.2.2 The My Certificates Edit Screen
Click Object > Certificate > My Certificates and then the Edit icon to open the My
Certificate Edit screen. You can use this screen to view in-depth certificate information and
change the certificate’s name.
Request
Authentication When you select Create a certification request and enroll for a certificate
immediately online, the certification authority may want you to include a
reference number and key to identify you when you send a certification
request.
Fill in both the Reference Number and the Key fields if your certification
authority uses CMP enrollment protocol. Just the Key field displays if your
certification authority uses the SCEP enrollment protocol.
For the reference number, use 0 to 99999999.
For the key, use up to 31 of the following characters. a-zA-Z0-
9;|`~!@#$%^&*()_+\{}':,./<>=-
OK Click OK to begin certificate or certification request generation.
Cancel Click Cancel to quit and return to the My Certificates screen.
Table 220 Object > Certificate > My Certificates > Add (continued)
LABEL DESCRIPTION