ZyXEL Communications 200 Series - Manual (Page 764)

Appendix A Log Descriptions
ZyWALL USG 100/200 Series User’s Guide
764
The SSL VPN policy %s
does not configure
users or user groups.
There are no users or user groups configured for the listed SSL VPN
policy (%s).
SSL VPN policy rule %s
has been inserted.
The listed SSL VPN policy (%s) has been inserted in the list of SSL
VPN policy rules.
SSL VPN policy rule %s
has been appended.
The listed SSL VPN policy (%s) has been added to the end of the list.
SSL VPN policy rule %s
has been modified.
The configuration of the listed SSL VPN policy (%s) has been
changed.
SSL VPN policy rule %s
has been moved to %d.
The listed SSL VPN policy (%s) has been moved to the listed position
(%d) in the list of SSL VPN policies.
SSL VPN policy rule %s
has been deleted.
The listed SSL VPN policy has been removed.
%s %s is accessed.
sent=
rcvd=
The listed SSL VPN access was used to send and receive the listed
numbers of bytes.
The first %s is the type of SSL VPN access (web application, file
sharing, or network extension).
The second %s is the name of the application. This is N/A for a
network extension.
%s %s from %s has been
logged out SSLVPN (re-
auth timeout)
The specified user was signed out by the device due to a re-
authentication timeout.
The first %s is the type of user account.
The second %s is the user’s user name.
The third %s is the name of the service the user is using (HTTP or
HTTPS).
%s %s from %s has been
logged out SSLVPN
(lease timeout)
The specified user was signed out by the device due to a lease
timeout.
The first %s is the type of user account.
The second %s is the user’s user name.
The third %s is the name of the service the user is using (HTTP or
HTTPS).
%s %s from %s has been
logged out SSLVPN
(idle timeout)
The specified user was signed out by the device due to an idle
timeout.
The first %s is the type of user account.
The second %s is the user’s user name.
The third %s is the name of the service the user is using (HTTP or
HTTPS).
Failed login attempt
to SSLVPN from %s
(login on a lockout
address)
An SSL VPN login attempt from the listed user (%s) was blocked due
to too many failed login attempts.
Failed login attempt
to SSLVPN from %s
(reach the max. number
of user)
The listed user (%s) failed to log into SSL VPN because the maximum
number of users were already logged in.
Table 280 SSL VPN Logs (continued)
LOG MESSAGE DESCRIPTION