ZyXEL Communications 200 Series - Manual (Page 219)

Chapter 10 Interface
ZyWALL USG 100/200 Series User’s Guide
219
10.5.6 Interface Wizard: Summary (Non-WAN)
Use this screen to review the local interface’s settings.
Figure 157 Interface Wizard: Summary (Non-WAN)
The following table describes the labels in this screen.
10.5.7 Interface Wizard: Summary (WAN)
This screen displays the WAN interface’s settings.
Table 57 Interface Wizard: Summary (Non-WAN)
LABEL DESCRIPTION
Zone This is the security zone to which you want this interface belongs.
IP Address This is the interface’s IP address.
IP Subnet Mask This is the interface’s subnet mask in dot decimal notation.
Enable DHCP
Server This shows whether or not the ZyWALL is the DHCP server for the network
connected to this interface.
IP Pool Start
Address If the ZyWALL is the DHCP server for the network connected to this interface, this
field displays the IP address from which the ZyWALL begins allocating IP
addresses.
Pool Size If the ZyWALL is the DHCP server for the network connected to this interface, this
field displays how many IP addresses the ZyWALL can allocate.
Add default
policy routes for
WAN access This shows whether or not the ZyWALL automatically configured default policy
routes to allow users connected to this interface to access the WAN.
OK Click OK to close the screen.