ZyXEL Communications 200 Series - Manual (Page 69)

Chapter 3 Web Configurator
ZyWALL USG 100/200 Series User’s Guide
69
Interface Status Use this screen to see information about all of the ZyWALL’s interfaces and
their connection status.
Port Role Use this screen to set the ZyWALL’s flexible ports as LAN1, WLAN, or DMZ.
Ethernet Use this screen to manage Ethernet interfaces and virtual Ethernet
interfaces.
PPP Use this screen to create and manage PPPoE and PPTP interfaces.
Cellular Use this screen to configure settings for a cellular Internet connection through
an installed 3G card.
WLAN Use this screen to configure settings for an installed wireless LAN card.
VLAN Use this screen to create and manage VLAN interfaces and virtual VLAN
interfaces.
Bridge Use this screen to create and manage bridges and virtual bridge interfaces.
Auxiliary Use this screen to manage the AUX port.
Trunk Use this screen to create and manage trunks for load balancing and link HA.
Routing Policy Route Use this screen to create and manage routing policies.
Static Route Use this screen to create and manage IP static routing information.
RIP Use this screen to configure device-level RIP settings.
OSPF Use this screen to configure device-level OSPF settings, including areas and
virtual links.
Zone Use this screen to configure zones used to define various policies.
DDNS Profile Use this screen to define and manage the ZyWALL’s DDNS domain names.
Status Use this screen to view the status of the ZyWALL’s DDNS domain names.
Virtual
Server Use this screen to set up and manage port forwarding rules.
HTTP
Redirect Use this screen to set up and manage HTTP redirection rules.
ALG Use this screen to configure SIP, H.323, and FTP pass-through settings.
Firewall Use this screen to create and manage level-3 traffic rules.
VPN VPN Connection Use this screen to configure IPSec tunnels.
IPSec VPN VPN Connection Use this screen to configure IPSec tunnels.
VPN Gateway Use this screen to configure IKE tunnels.
Concentrator Use this screen to configure VPN concentrators (hub-and-spoke VPN).
SA Monitor Use this screen to monitor current IPSec VPN tunnels.
SSL VPN Access Privilege Use this screen to configure SSL VPN access rights for users and groups.
Connection
Monitor Use this screen to monitor current SSL VPN connection.
Global Setting Use this screen to configure the ZyWALL’s SSL VPN settings that apply to all
connections.
L2TP VPN L2TP Over IPSec Use this screen to configure L2TP Over IPSec VPN settings.
Session Monitor Use this screen to monitor current L2TP Over IPSec VPN sessions.
Table 6 Navigation Panel Summary (continued)
LINK TAB FUNCTION